| Specification | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
| Dimension | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Sheets Size Range | Cold rolled Sheet 0.5-6.4 mm,
Hot rolled Sheet 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| Finish | 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled SA 240 S32304 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard |
| Stock available in form of | SA 240 UNS S32304, Sheet, Coils, Foils, Strip, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate |
| Plasma profiles | As per client's specification |
| Tolerances | EN 10258/ DIN 59381 |
| Profiling | To provide a full profiling service in UAE we use numerous profiling methods including: - Laser Plate Cutting
- Plasma Plate Cutting
- Oxy-propane Flame Cutting
|
| Value added services for SA 240 UNS S32304 | - Cut-to-length
- Laser cutting
- Slitting
- Polishing
- Blanking
- Waterjet cutting
- Plasma cutting
- Edge preparation
- Welding
- Sawing and shearing
- Bending and mechanical processing
|
| Standards and approvals for SA 240 UNS S32304 | - EN ISO 18286
- EN 10051
- EN 10088-1
- ISO 15510
- EN ISO 9445
- ASTM A 480
- ASTM A 959
- ASME IID
|
| Why choose us? | - Large stock of SA 240 UNS S32304
- Mill Test Certificate is supplied with shipment.
- Any third party inspection is accepted.
- SA 240 UNS S32304 are tested to ASTM A923 Method "C" or ASTM G48 Method "A".
- Minimum Nitrogen content and Ferrite Count Test
|
