ASTM AISI 316LN S31653 Stainless Steel Sheet DIN1.4429 ESR Metal Sheet 0.5-10mm
Type 316LN stainless steel is austenitic steel suitable for the fabrication of many products. Due to its molybdenum content, it can be used in applications that require increased corrosion resistance.
It has a more stable austenitic structure, which means it provides a lower magnetic permeability. The nitrogen content adds additional resistance to sensitization.
Similar to types 316 and 316L stainless steel, type 316LN provides great resistance to general corrosion and pitting/crevice corrosion.
Common Names:
- Stainless steel type 316N is commonly known as Chromium-Nickel steel.
Executive Standards/Grades:
- JIS: G4303
- ASTM: ASTM A240, ASTM A213, ASTM A276 and so on.
- DIN: 1.4406
- UNS: S31653
- EN: X2CrNiMoN17-13-3
- SUS: SUS316LN
Chemical Properties:
Type 316LN stainless steel has the following chemical composition:
- Carbon – 0.03%
- Manganese – 2.00%
- Chromium – 16.0% – 18.0%
- Nickel – 10.0% – 14.0%
- Molybdenum – 2.0% – 3.0%
- Sulphur – 0.03%
- Phosphorus – 0.045%
- Silicon – 1.00%
- Nitrogen – 0.10 – 0.30%
- Iron – Balance
Mechanical Properties:
- Hardness (HRB) – 95 (maximum)
- Elongation (%) – 60
- Yield Strength (Mpa) – 205
- Tensile Strength (Mpa) – 515
- Poisson’s Ratio – 0.27 – 0.30
Physical Properties:
- Density (8000 Kg/M3)
- Elastic Modulus (Gpa) – 200
- Thermal Conductivity (Btu/ft hr ⁰ F) – 8.4 – 16.3
- Specific Heat (Btu/lb/°F) – 0.116 at 200 oF
- Electrical Resistivity (µohm/cm) – 7.4
Key Features:
- Low-carbon, nitrogen-enhanced version of Type 316, providing higher resistance to sensitization
- Its nitrogen content provides solid solution hardening, increasing the minimum specified yield strength
- Excellent resistance to oxidation and low rate of scaling at temperatures up to 1650oF
- Provides more resistance to atmospheric and other types of corrosion
- Is considered one of the most weldable of the stainless steels
- Hot forming can be performed in the range of 1560 – 2100 oF
- Type 316LN can be formed and fabricated by any cold forming operation
Forms Available:
Stainless steel type 316LN is available in different forms such as:
- Sheet
- Seamless
- Coiled
- Rod coil
- Plate
Stainless steel features:
1. Complete product specifications and diverse materials;
2. High dimensional accuracy, up to ±0.1mm;
3. Excellent surface quality, good brightness;
4. Strong corrosion resistance, high tensile strength and fatigue strength;
5. Stable chemical composition, pure steel, low inclusion content;
6. The package is in good condition and the price is favorable;
7. Can be done without calibration.
| Product | ASTM AISI 316LN S31653 Stainless Steel Sheet DIN1.4429 ESR Metal Sheet 0.5-10mm |
| Material | Stainless steel |
| Grade | 200 Series, 300 Series, 400 Series... |
| Thickness | 0.3-120mm,below 3mm is stainless steel 2b sheet ,over 3mm is stainless steel hot rolling sheet. |
| Specification | 2b sheet/hot rolling No.1 sheet:1000×2000mm,4×8(1219×2438mm)
4×10(1219*3048mm),4*3500mm,4*4000mm, 1500×3000/6000mm.
Coil Width:1020/1240/1530/1800/2000, can be customized. |
| Original of raw material | Posco, Jisco, Tisco, Baosteel, Lisco,etc |
| Size | Cold Rolled Stainless Steel Plate:Width: 300mm-6000mm
Common size: 1000mm * 2000mm, 4×8(1219×2438mm), 4×10(1219*3048mm), 1500mm * 3000mm or customized.
Hot Rolled Stainless Steel Plate:
Width: 1000mm-1800mm
Common size: 1500mm * 6000mm, 1250mm * 6000mm, 1800mm * 6000mm or customized. |
| Surface Processing | NO1, 2B, BA, matte / hairline, 8K / mirror, embossed, etching, color mirror, color embossing, color etching etc. |
| Supply Ability | 10000 Ton/Tons per Month |
Package & Delivery
| PVC waterproof + strong-worthy ocean wooden packing
Shipped in 5-25 days after payment |
Product Tags:
|
|
ASTM AISI 316LN S31653 Stainless Steel Sheet DIN1.4429 ESR Metal Sheet 0.5-10mm Images
|
